EN

DALI control options

DALI

DALI, or Digital Addressable Lighting Interface, is a dedicated protocol for digital lighting control that enables the easy installation of robust, scalable and flexible lighting networks. LIGMAN luminaires with DALI variants can be easily integrated into any DALI system. 

Accessories

A68791
Lunatone – DALI-2 Display 7″

– 7″ capacitive touchscreen with 24-bit colour depth
– Configuration of scenes Tunable White and RGB colour management
– Dimming and switching of groups and individual addresses
– Configuration of groups, addressing and set-up of DALI systems
– Integrated sensors for measurement and visualization of sensor values such as temperature,
    air quality, air pressure, and humidity
– Configuration and control of a DALI system. The DALI protocol standard IEC62386 is used to
    control the lighting equipment
– 24V, 300mA or Power Over Ethernet – POE
– Easy installation: the device can be installed on a flush-mounted installation box
– Support integration via LAN or WLAN in building management systems

A68891
Lunatone – DALI-2 ROT Touch with 5 sensor keys

– DALI control module for dimming, colour, and colour temperature control
– 3 or 5 capacitive sensor keys to switch between different operating modes or effective ranges
– Individual DALI commands and operating modes can be assigned to the push and rotary buttons
– Operating mode for control of brightness and colour temperature of DT8 tunable white luminaires
    and light level and colour of DT8 RGB and RGBW luminaires
– Easy configuration via DALI USB interface and DALI-Cockpit software tool
– NFC for simple, wireless configuration with the LUNATONE NFC smartphone app

A68991
Lunatone – DALI-2 BT5 Room Controller

– DALI-Bluetooth Interface
– Unit for commissioning, configuration, and control of a DALI system via Bluetooth using the
    LUNATONE smartphone application DALI-Cockpit Mobile
– Output with DALI power supply (200mA) for the supply of up to 64 DALI devices
– Independent control gear (for remote ceiling or integration in luminaires)
– Test button for functional testing

A69091
Lunatone – DALI Repeater

– Device to enhance the maximum DALI cable length from 300 m up to 600 m
– Enhancement and Transmission of the DALI-signals (bidirectional)
– Cascading (Series wiring) of up to 3 repeaters
– The maximum amount of DALI devices in the total network is limited to 64, the devices can be
    divided into the sub-circuits freely
– Repeater PS: Test button for simple function check of all DALI bus ballasts
– Repeater PS: Module for DIN rail mounting and for remote ceiling installation available

A69191
Lunatone – DALI PS – 250mA

– DALI bus power supply unit
– Guaranteed Supply Current 220mA
– Maximum Supply Current 250mA
– Suitable to power an entire DALI-line with 64 standard DALI ballasts
– Suitable for DIN rail mounting
– Power supply range 120Vac … 240Vac for worldwide use
– Surge immunity up to 400V
– Load indicator
– Integrated test button for function check
– System status queries (DALI current, busload, runtime, etc.) with DALI-Cockpit Software

A69291
Lunatone – DALI CS Corridor – IP65

– Sensor module for DALI lighting systems
– Movement detection (PIR)
– Light intensity measurement
– Constant light control
– Time hysteresis to compensate for short-term fluctuations in brightness
– Setting option for basic brightness
– Simple configuration via DALI bus line using the DALI-Cockpit software
– Direct power supply via DALI line
– Version for indoor and outdoor use IP65
– Multimaster capable: several DALI CS modules can be used within one DALIline

A69391
Lunatone – DALI PS2 30mA

– DALI bus power supply unit
– Guaranteed Supply Current 30mA for Version 24033444-30
– Maximum supply current allowed on a DALI line in total: 250mA
– Version 24033444-30 is suitable to power a DALI-line with up to 15 standard DALI ballasts
– Version 24033444-80 is suitable to power a DALI-line with up to 40 standard DALI ballasts
– Suitable for backbox installation and integration in protection class II devices
– Power supply range 110Vac … 240Vac for worldwide use
– Surge immunity up to 400V

A69591
Lunatone – DALI Repeater PS – 200mA – Remote ceiling

– DALI Repeater, integrated power supply (200mA), remote ceiling
– Device to enhance the maximum DALI cable length from 300 m up to 600 m
– Enhancement and Transmission of the DALI-signals (bidirectional)
– Cascading (Series wiring) of up to 3 repeaters
– The maximum amount of DALI devices in the total network is limited to 64, the devices can be
    divided into the sub-circuits freely
– Type with integrated power supply available
– Repeater PS: Test button for simple function check of all DALI bus ballasts
– Input voltage range 100-240Vac
– Current consumption DALI 2mA
– Cascading of up to 3 repeaters is possible

A69691
Lunatone – DALI Repeater PS – 200mA – DIN rail

– Module for DIN rail mounting
– DALI Repeater, integrated power supply (200mA)
– Device to enhance the maximum DALI cable length from 300 m up to 600 m
– Enhancement and Transmission of the DALI-signals (bidirectional)
– Cascading (Series wiring) of up to 3 repeaters
– The maximum amount of DALI devices in the total network is limited to 64, the devices can be
    divided into the sub-circuits freely
– Type with integrated power supply available
– Repeater PS: Test button for simple function check of all DALI bus ballasts
– Input voltage range 100-240Vac
– Current consumption DALI 2mA
– Cascading of up to 3 repeaters is possible

A69791
Converter DMX to DALI

– Converter from DMX protocol to DALI protocol
– Converts only the first 64 DMX channels in 64 DALI addresses
– Compatible only with DALI 1-2 device type 6 drivers
– Unstable power protection OVP, UVP, RVP, IFP
– DC Input: 12-24-48 Vdc
– Power supply – 100 W – IP20 – DIN Rail is included
– 5 Years warranty from the manufacturer

A69891
Converter DALI to DMX

– Converter from DALI protocol to DMX protocol
– Converts all 64 DALI addresses in 64 DMX channels
– Compatible only with DALI 1-2 device type 6 drivers
– Unstable power protection OVP, UVP, RVP, IFP
– DC Input: 12-24-48 Vdc
– Power supply – 100 W – IP20 – DIN Rail is included
– 5 Years warranty from the manufacturer

DALI System block diagram

System block diagram: DMX to DALI

System block diagram: DALI to DMX